This airport has been surveyed by the national geodetic survey.
Caution: open baggage bays and construction within the terminal ramp area. Aircrews should use minimum thrust settings in these areas, spcly during single eng taxi. CROSS-BLEED starts only allowed after reaching the tug release point.
All aircraft traffic on the ramp should expect A clockwise flow. outbound traffic from gates D2, D4, D6, D8 and D10 proceed to please call spot 1. outbound traffic from gates C2, C4, C6, D1, D3, D5 and D7 proceed to please call spot # 3. outbound traffic from gates B2, B4, B6, B8, C1, C3, C5 and C7 proceed to please call spot # 5. outbound traffic from gates B1, B3 and B5 proceed to please call spot # 9. All outbound traffic request taxi instructions.
Taxiway F6 exit sign is located immediately before taxiway F5.
Air carrier pilots use ramp proc as prescribed by airport operations.
Arrival - inbound traffic for all gates, proceed directly to the gate unless otherwise directed by air traffic control. Advise air traffic control if gate is not available.
Departure - aircraft must obtain approval from ground control prior to pushback from gates B7, B9, C8, C9 and D10A. pilots advise tug operators that you have obtained clearance from ground control prior to entering taxiway G. Departures contact ground control prior to leaving the commuter ramp from gates D9A and D9B.
No helicopter operations permitted on terminal apron.
Lights on parallel road and parking lot northwest of runway 06/24 can be mistaken for the runway and approach environment.
Ground clearance required prior to entering taxiway G.
Airport has runway use program. use distant noise abatement departure profile. visual approaches to runway 06 west of fort myers beach are requested to maintain 3000 ft until crossing fort myers beach shoreline 12 nm southwest of airport. runway 24 preferred between 2200-0600. For noise abatement procedures contact airport manager 239-590-4810
Fees for all charter and travel clubs and revenue producing aircraft.
Activate MALSR runway 06 - CTAF. All other lights operate continuously.